PDA

View Full Version : Yamaha Rhino Guess my HP

pronstar
06-03-2009, 01:15 PM
Well, after a tough season, I took my Rhino to the shop for repair/maintenaance.

First to SDR for a frame repair and new axles (Summer's Brothers) and CV's (stockers).

I had a couple bad Gorilla CV's and they're too damned expensive for what they are...my entire new setup cost less that one Gorilla Axle with CV's.

And now...it's with John at The Pro Shop.
My Pro-Tec duals quite literally blew themselves apart...perfect excuse to upgrade to a Ron Woods setup. Having him put a K&N intake on as well.

My Rhino has a Web Cam in it already, everything else in the motor is stock. Not sure if the KMS sheave or duner's kit will affect the power that it puts down.

Anyone wanna guess how much power she'll make?

John doesn't really tune for peak power, which is fine by me.
So throw some numbers out...I'll buy a beer for whoever is the closest.

I'm guessing 27 hp :confused:
FernandezRacing
06-03-2009, 01:18 PM
29HP
JoeyD23
06-03-2009, 01:20 PM
I will say john will squeeze about 31 out of it?
max powers
06-03-2009, 01:25 PM
yours must be the camo rhino with the mason kit, I just left the pro shop
Your stock front rims are rubbing on your brake lines.
s2k1
06-03-2009, 01:57 PM
Which Web Cam is in it?
Bryan M
06-03-2009, 01:59 PM
29.5 hp
family wagon
06-03-2009, 02:23 PM
What is stock ?
Doin Dirty
06-03-2009, 02:24 PM
31.52
JoeyD23
06-03-2009, 02:27 PM
geez, throw some beer out there and evryone comes out to vote! hahahahah
pronstar
06-03-2009, 03:56 PM
yours must be the camo rhino with the mason kit, I just left the pro shop
Your stock front rims are rubbing on your brake lines.

Yup, that was mine.
I told John to give me the "Max Powers discount pricing" :D

The wheels were just to roll it off the trailer and into the shops.
I'm in the process of putting new tires on my good wheels.
pronstar
06-03-2009, 03:58 PM
Which Web Cam is in it?

Stage 1
shonuff
06-03-2009, 07:26 PM
30 hp
SoCal
06-03-2009, 07:41 PM
30&1/4
pronstar
06-03-2009, 09:54 PM
Shit..left my cell phone at home today and John called me twice.

Hopefully everything is OK...maybe he called to tell me he's never seen a Rhino make so much power :)
max powers
06-04-2009, 06:08 AM
Shit..left my cell phone at home today and John called me twice.

Hopefully everything is OK...maybe he called to tell me he's never seen a Rhino make so much power :)

he was callin to find out what you want done, they did a compression check when I was there to make sure your car could handle some upgrades.
Crowdog
06-04-2009, 06:25 AM
It has Web valve springs in it too.
J.T.
06-04-2009, 09:49 AM
It has Web valve springs in it too.

you should know LOL:D
Crowdog
06-04-2009, 02:24 PM
you should know LOL:D

Yep. I loved than Rhino. Still dig the camo look.
proshop
06-05-2009, 12:41 PM
first things first. decomp pin flat and rocker has big trench. good stuff! always deburr camshaft and check pin action upon install. back to life on tuesday then we will dyno.
BlackRhinoPerformance
06-05-2009, 01:01 PM
ID say 29.345 HP!:)
Headinjury
06-07-2009, 02:56 AM
Well, after a tough season, I took my Rhino to the shop for repair/maintenaance.

First to SDR for a frame repair and new axles (Summer's Brothers) and CV's (stockers).

I had a couple bad Gorilla CV's and they're too damned expensive for what they are...my entire new setup cost less that one Gorilla Axle with CV's.

And now...it's with John at The Pro Shop.
My Pro-Tec duals quite literally blew themselves apart...perfect excuse to upgrade to a Ron Woods setup. Having him put a K&N intake on as well.

My Rhino has a Web Cam in it already, everything else in the motor is stock. Not sure if the KMS sheave or duner's kit will affect the power that it puts down.

Anyone wanna guess how much power she'll make?

John doesn't really tune for peak power, which is fine by me.
So throw some numbers out...I'll buy a beer for whoever is the closest.

I'm guessing 27 hp :confused:

Dont say hi then.... :(
pronstar
06-07-2009, 10:38 AM
Dont say hi then.... :(

I didn't have time to go to your shop to get my rhino, so I had John pick it up for me :)
Headinjury
06-07-2009, 11:32 AM
Oooh, no problem brother, just messin with ya...
Crowdog
06-07-2009, 01:02 PM
Doesn't it have valves too?
pronstar
06-09-2009, 05:09 PM
Doesn't it have valves too?

You tell me...I bought it from you! :D

Your buildup page says Web Cam, Valves & Springs.


Just talked to John, and it made...







...drumroll please...






38.2 hp
Must be something good in there :)
JoeyD23
06-09-2009, 05:18 PM
SO I win right? You owe me a beer!!!
Bryan M
06-10-2009, 09:52 AM
I will say john will squeeze about 31 out of it?

31.52

30&1/4

SO I win right? You owe me a beer!!!

Ummmmm Joey .....how you figure ninja looks like two in front of you:rolleyes:
family wagon
06-10-2009, 10:02 AM
38 HP thats pretty good for what you have done to it
pronstar
06-10-2009, 11:07 AM
Hell I can spare a few beers :D
pronstar
06-18-2009, 10:03 PM
Pickd up my Rhino and got my dyno print-out today.
Nice flat, broad spread of power.
You can see where the CVT "shifts" into high gear.

http://i253.photobucket.com/albums/hh63/robbobster/DynoRun.jpg