Anyone interested in seeing what else is happening at Jagged?

[jaggedx]

Any ideas on what to do with 2008 Chevy 3500 4x4 Crew cab?
BSJX

[jaggedx]

The old D-max Chase truck was starting to get a little worn with over 200K so I did a little hunting and came up with this 08 gasser with only 55K on it. We figured we have to change all the spares out in the truck anyway we may as well change the truck too. Stay tuned here as the new Jagged X / Polaris Racing Chase truck takes shape.


BS JX

[JoeyD23]

I am subscribed!!! I have been slowly turning my daily driver diesel into a support/chase truck. I am pretty much done but need to come up with a chase rack and am thinking a custom one will be the way to go. I want to be able to help AGM with their TT program and be able to carry 37" & 39" tires but then also make it to where I could carry smaller UTV tires as well. Anyway, I will be glued to this thread!

[jaggedx]

It definately doesn't look like that anymore.:D
Mike

[Darryl89]

Subscribed... maybe I'll get some ideas for my 08 duramax...

[Brian B]

I'm here for the gangbang.

I would have done a chase rack with lights and whatnot if I didnt have to tow a fifth wheel......

[jaggedx]

It definately doesn't look like that anymore.:D
Mike

Not quite!

[jaggedx]

So the first step was to visit the great guys at Western Truck Equipment. They hooked us up with a good deal on a nice Reading truck bed. This is a nice box with smooth doors and hidden hinges.
We hauled it over to CR Designs to have Chad throw down a matching white coat of paint. Whit is a good starting point for whatever color we decide to splash on Chase II.

While we had the bed off we bolted in a set of air bags to help manage the extra weight of the loaded utility box.

And I guess no better time to have the fine folks at Total Auto Pros install a 6" RCD lift kit to improve the stance of this rig.

[jaggedx]

Can you say Ghetto? These have got to go!

[jaggedx]

I am thinking more like this! Thanks Walker Evans this is going to work. paired up with some Nitto 35x12.50x17's Would have gone with BFG KM2's but they are on national B/O. There will be BFG's on this truck before long.

[jaggedx]

So, What do you think? Good start?

[JoeyD23]

Bad ass. Rep points. Keep it rocking.

[jaggedx]

lots of good stuff to come for this truck. Wait till you see the tool & supply storge, We are really up against the clock. Upcoming we will add an air system, comunications, lighting, and some other cool schit!

Stand by!

[BiggJim]

Thats too bad:o We have all the GM truck fixes to keep that rig running solid for another 200K miles

Cognito Pitman/Idler kit
Cognito HD Idler pivot with weld in Gusset
Cognito HD heim Tie rod kit
Cognito 4-6" Cognito kit
Cognito Uni ball UCA's
Cognito Limit strap kit to keep that Upper Joint from killin itself
and last but not least a set of fox shocks to smooth out the ride:cool:

[megadesertdiesel]

What kind of air system? York compressor or 12volt?

If I remember correctly the last truck held the utv above the boxes, did that work out? Too top heavy? Rather have it in an enclosed trailer?

[FOXC]

subscribed...lookin good. Get some color on that thing though:D

[jaggedx]

What kind of air system? York compressor or 12volt?

If I remember correctly the last truck held the utv above the boxes, did that work out? Too top heavy? Rather have it in an enclosed trailer?

No York, it will be electric, also no car on top...it wouldn't fit anyway and was pretty hard on the box on the other chase truck.
Mike

[jaggedx]

Thats too bad:o We have all the GM truck fixes to keep that rig running solid for another 200K miles

Cognito Pitman/Idler kit
Cognito HD Idler pivot with weld in Gusset
Cognito HD heim Tie rod kit
Cognito 4-6" Cognito kit
Cognito Uni ball UCA's
Cognito Limit strap kit to keep that Upper Joint from killin itself
and last but not least a set of fox shocks to smooth out the ride:cool:

The old truck is still on the scene. Chad from CR designs will be using it for his painting business and as a secondary truck for our team.

[jaggedx]

We put together a little back bumper. Should serve as good workspace if needed. And help us in those crowded parking lots at BITD races.

[tatum]

Looking good.Arent those Centerline wheels you were calling ghetto?I think Walker Evans may have ran Centerline wheels at some point in his career.

[jaggedx]

Looking good.Arent those Centerline wheels you were calling ghetto?I think Walker Evans may have ran Centerline wheels at some point in his career.

Probably...in the 80's.:D "Ghetto" probably wasn't the right word...."severely out of date" would have been more accurate.
Mike

[jaggedx]

No, I like "Ghetto" They are gone and I saw what they are going on. Trust me!

BS JX

[tatum]

In this day they probably are but I remember when they were the sh#t.

[jaggedx]

Oh Hell Yea, I would have given my left Shnut to be able to afford those suckers back in the day. I had to settle for Enkie outlaws but always wanted CL's .

Funny when you look back at old trends.

BS JX

[Heybeerman]

I have an idea..... You should build a bad ass toolbox, to fit inside of your bedbox.

[jaggedx]

I have an idea..... You should build a bad ass toolbox, to fit inside of your bedbox.

Speaking of ghetto.:D
Mike

[rockstarcustomz]

Very cool stuff! Eric is building an old dodge diesel to be our chase truck some time in the future. I'll have to get some pics of it and post. Its got a 6" lift, 37's and will eventually have a stack in the back and a rack to hold all the goodies. I like it cause it's old school. Kind of like those CL's:D

[JoeyD23]

Wheres zee updates on this beast?

[jaggedx]

Wheres zee updates on this beast?

Bill's working on it, should be ready some time in 2010.:D
Mike

[jaggedx]

I'm Sure you meant sometime in 2012. You are such a diktame!

[JoeyD23]

I love that you 2 share a screename then make fun of each-other. It's like we have a member with split personality. lol