Xp900 Stage 80 Kit

[Queen Racing]

Here is a peek of our all new top end kit for the xp900. We have our new Billet Closed Deck cylinder kit, studs, Billet Rods, CNC Ported Head, +2mm Titanium valves, Berrilium seats, Billet intake manifold, and CNC bored and ported Throttle Bodys. We will be race testing this package this weekend. I will post dyno results tomorrow.. It rips!!!
Attached Thumbnails

[tech3sandcars]

May need to fix the picture links, they take you to the RZR forum and ask for login info.

[poflo]

Here is a peek of our all new top end kit for the xp900. We have our new Billet Closed Deck cylinder kit, studs, Billet Rods, CNC Ported Head, +2mm Titanium valves, Berrilium seats, Billet intake manifold, and CNC bored and ported Throttle Bodys. We will be race testing this package this weekend. I will post dyno results tomorrow.. It rips!!!
Attached Thumbnails http://www.rzrforums.net/attachments/queen-racing/50177d1334093067t-queen-racing-stage-80-kit-photo-43-.jpg (http://www.rzrforums.net/attachments/queen-racing/50177d1334093067-queen-racing-stage-80-kit-photo-43-.jpg) http://www.rzrforums.net/attachments/queen-racing/50178d1334093067t-queen-racing-stage-80-kit-photo-44-.jpg (http://www.rzrforums.net/attachments/queen-racing/50178d1334093067-queen-racing-stage-80-kit-photo-44-.jpg) http://www.rzrforums.net/attachments/queen-racing/50179d1334093067t-queen-racing-stage-80-kit-photo-45-.jpg (http://www.rzrforums.net/attachments/queen-racing/50179d1334093067-queen-racing-stage-80-kit-photo-45-.jpg) http://www.rzrforums.net/attachments/queen-racing/50180d1334093067t-queen-racing-stage-80-kit-queen-racing-billet-cylinders.jpg (http://www.rzrforums.net/attachments/queen-racing/50180d1334093067-queen-racing-stage-80-kit-queen-racing-billet-cylinders.jpg)

Great work ,Mark.......Cannt wait to see RW HP #'s

[Queen Racing]

Dyno results in about 1 hour..:D

[JoeyD23]

waiting.............. lol

[poflo]

STILL WAITING :D:D

[poflo]

Sorry guys ,I already know.......:eek::eek:

[Queen Racing]

Well here is the dyno results of our all new race engine package. We are very happy with the testing. It made more power that I had expected. Now it is time to endurance test it and race it. I cant wait to be the one racing this car this weekend!!:D


Queen Racing XP999 - YouTube

[JoeyD23]

HOLY CRAP!! 117hp??

[Queen Racing]

Last week with the old motor it made 94. It's really fast, now we just need to see how long it stays fast.

[poflo]

That is stout.......no power adders.......good job Mark

[Queen Racing]

HOLY CRAP!! 117hp??

Yea, thats what I said! I was hoping for 105! I like the fact that it is at 78MPH in about 3 seconds.. I also lied on accident, the stock car made 74hp, not 64.

[poflo]

What caused the spike on #8 run

[rappy60guy]

dang po your on top of it !!! Good eyes my friend. Thats a smoking motor !! Can only imagine what its going to cost :eek:

[poflo]

I'm guessing clutch

[Queen Racing]

Good eye! I accedentaly hit the throttle too early and flipped load switch during acceleration. It's a easy way to spike huge power #'s.

[Crowdog]

Nice!

[widearse900]

dang po your on top of it !!! Good eyes my friend. Thats a smoking motor !! Can only imagine what its going to cost :eek:

would love to know how much a kit like this will cost...:) looking for more sustainable power:D

[Queen Racing]

would love to know how much a kit like this will cost...:) looking for more sustainable power:D

I have already been beating on this package. But I really need to race test it to make sure it can take the abuse. I will have pricing on the kit next week.. Thanks

[goob]

Wow!!!! I finished the final maintenance on the car and took it through our regular testing grounds earlier today. I could not believe the power that was actully getting to the ground. The car really exceed my expectations. First Queen Racing built my 965cc that is a great motor that never let me down. This motor was more than enough to compete with the top competitors. As Mark (Queen Racing) told me when he first started building my motors he said, "we will start out being reliable and progressively build to a monster motor." Well as I pounded on that 965cc I couldn't break it. It lasted through some pretty brutal situations. And now I can not believe the power of the new motor. It is defiantly going to be a car to watch for at the WORCS race this weekend. Thankyou for all the work that you have put into my car Mark. Good luck in this green monster you deserve the first race.

[Bajaxp]

Big power...congrats!
So this is a WORC's style motor?
At what RPM did you make peak power?
What fuel requirements does the new motor have?
What is the compression ratio?
Have you put it on an engine dyno? If so what #'s?
What are you doing for ECU tune? Yourself?, Benchmark?, controller?, Other?
What clutching package do you have?

Good stuff...learn me!

[Insane rzr]

what did the stage 80 kit consist of besides a big bore cyclinder

[Queen Racing]

Our new stage 80 kit consists of::

Our new Billet Closed Deck cylinder kit, studs, Billet Rods, custom cp pistons, CNC Ported Head, +2mm Titanium valves, Berrilium seats, Billet intake manifold, and CNC bored and ported Throttle Bodys, billet intake runners, stroker crank (billet ones in the works!!!) Cams, Queen Racing reflashed stock ecu, and hundreds of hours of test and development time..

Unfortunately our race results were not good. I overshot the big tabletop and flat landed. I broke the rear upper shock mounts, bent the frame, and snapped the crank in half all on the hard impact. I guess next time I wont try to catch RJ!! I do have billet cranks in the works. I have over 20 of these cranks out there and no failures up until my big air!..

The package was working awesome until my driver mistake. Well that's racing!!

[poflo]

At least you can get the billet cranks,before you market this new kit ......... that motor makes a lot of HP

[HUBB]

DAM RIGHT FOOT THE NEW DRIVER AND OLD DRIVER BACK OUT SOME TIMES IT WILL LAST LONGER OR IS IT THE CAR HOPE U GET IT FIXED BEFOR THE NEXT RACE AND DONT FORGET RACE WITH A GILR IN THE CAR LOL HAVE FUN BOYS :D:D:D

[GOVACHO]

So what is the final price on this for a 2013 xp900 ?

[Little Clod Buster]

subscribed

[Queen Racing]

So what is the final price on this for a 2013 xp900 ?

Bart, I have several different options available for this kit now. Give me a call and I can figure out what type of setup will fit your needs best and then we can dial in a price for your build..


Thanks, Mark
928-302-0986

If I dont answer, please leave a message, Im prob on the dyno or assembling a engine.

[GOVACHO]

Thanks for your reply Mark. I will be calling you tomorrow.

[Hammbone]

subscribed

[Little Clod Buster]

Any word on this?

[Queen Racing]

Any word on this?

The kits have been dialed and there are a lot of them out there! There are a few racing the Worcs series, and there are a few racing Score and BITD. All have been bullet proof and reliable.

[Queen Racing]

Any word on this?
todays, update, the 1936 of Joseph Vinagaro finished 2nd overall in the Mint 400 today with this kit minus the stroker crank, running against the factory teams of Can-Am and Factory Polaris..:D Too bad they broke a belt on the first lap after leading..