Anyone running these new ITP spun aluminum T-9's? Curious of the weight difference vs a cast wheel.
ITP 12" T-9 PRO-MOD ALUMINUM SPUN WHEEL
ITP 12" T-9 PRO-MOD ALUMINUM SPUN WHEEL
ITP T-9 spun wheels anyone?
- Thread starter mosslager
- Start date
We have been running these T9 wheels in the best in the desert series all last season. We switched to this wheel because we blew out a few inner rims previously with other rims. They are super lite and have the inner lip rolled. We are running the 14 inch this season to be able to run the Itp 28 baja cross. Highly recommend them, and much stronger than the cast aluminum. Good luck!
We also ran these at the Baja 1000 in 2009 and had great luck with them but ours were beadlocked. They are lighter then most and stronger then heck. I'm not a huge fan of cast wheels as I have seen way too many of them bust the inner bead ring off of them or get a hole blown in the inner half.
I own OMF modified DWT's and Walkers.
I own OMF modified DWT's and Walkers.
I would also be interested in finding out where these are available with the beadlock ring installed. Looks like a workable solution for some plans I have.
Give Ryan over at Itp a call and he can get you to the nearest retailer or just check online. OMF can beadlock the 14" wheels. You will really like these.