Polaris Keep That CVT Cool!!!

dmcmark

Active Member
Apr 20, 2012
268
45
28
We have the only kits on the market that adds an extra volume of cooling air to the XP1000 and XPT!!!

Because ours is the only kit on the market that does this you will see dramatic reductions in direct belt temperatures which is crucial to a healthy CVT system.

Although we are conservative in the results you will see, you can expect to see a minimum of a 45 degree drop in direct belt temperatures.


Our CVT Blaster II kit for the RZR XPT was recently evaluated in the October issue of "Dirt Wheels" magazine and the results were much better than we conservatively state. If that wasn't enough word has gotten out about the "Blaster II" and Jake Carver #936 signed on to use a double stacker version of our kit as well as our
XP1000 Pre-Filter kit[B][URL='http://[url%3D%27http:/desertcraft-us.3dcartstores.com/XP1000-Pre-Filter-Kit_p_81.htmll']http://desertcraft-us.3dcartstores.com/XP1000-Pre-Filter-Kit_p_81.html[/URL]
in his quest for a championship in BITD. We also just dialed in Mitch Guthrie Jr. #4503 with a similar set up. We pretty much have the Ultra4 series covered with many of the racers having great results.... John Duckworth #1920, Phil Blurton #1944, Paul Hart #1911, Phil Cagliero #21.


XPT CVT Blaster

When it comes to our "Quick Draw" for the XP1000 it too has been quietly helping out and keeping belt temps in check with little or no belt failures.... Russell Griffin #1970 (5th V2R) with zero belt issues, Jonathan McVay #1952 (10th V2R) and Rookie driver Charlie Barney #1072 took on the Pure UTV 150 and finished a very respectable 5th overall and 3rd in class with zero belt issues.

XP1000 CVT- Quick Draw Full Force


If you're a racer, duner, or rock crawler our kits will give you the most efficient and highest belt temp drops of any kit currently on the market.


Here's a quick video explaining the benefits, and a review of some of the key parts of the install.





As you can see I was having a bad hair day, lol.

Enjoy

Regards,
 
Last edited:

dmcmark

Active Member
Apr 20, 2012
268
45
28
If you want to see our XPT CVT Blaster in person, you can check out the custom double stacker we set up for Jake Carver's car #936 at the International Offroad Expo in Scottsdale, AZ this weekend. His car will be located in the Baja Designs booth.
 

Members online

Forum statistics

Threads
17,292
Messages
179,387
Members
12,145
Latest member
felipebenjamin000