Rugged TERYX4 Install Thread

[RuggedRadios]

So many options to chose from. Unfortunately, it seems like there's always going to be a downside to whatever place we decide to mount the radio and intercom. If we are able to make a custom dash that fits where the cup holders are and come up with another solution for cup holders, I think that's going to be our best bet.

The other option is to make a faceplate like the one below. Big thanks to Kyle and Reid for the photo.



We're all still trying to decide our best route but should have a decision made by Monday. I have a feeling some cardboard cutouts will give us a better idea. We want something that's going to be super easy to install.

[66cummins]

waiting for a good update

[RuggedRadios]

We decided on what were doing! We tried a box mount that would go right next to the steering wheel but it didn't work out for us. It's a good spot for it, the only downside is you would hit your knee on it a lot. What our tech guy came up with was a bracket that will hug both the intercom and radio next to each other. You can either mount this below the glove box or under the roof if you have a roof. Not only will it work good for the Teryx but it will also be a good universal mount. We should have pictures of the prototype soon!

[Rusty5150]

Update????

[Rusty5150]

Here it is!!!

http://www.ruggedradios.com/index.ph...roducts_id=931

[megadesertdiesel]

Wow that is a disappointment. Pretty boring looking. Lots of holes for dirt and dust to get in also.

I am waiting for the LTI one.

[66cummins]

Originally Posted by megadesertdiesel

I am waiting for the LTI one.

you could be waiting awhile.... thanks for posting Rusty, I'll try and get some pics of it mounted in the car.....

[megadesertdiesel]

Originally Posted by 66cummins

you could be waiting awhile.... thanks for posting Rusty, I'll try and get some pics of it mounted in the car.....

No shit. I sent an email two months ago and just last week they replied with a cost of $140 . No picture attached. Then I asked for a picture and approx eta. And have not received anything back yet.

[az_amsoil]

Originally Posted by megadesertdiesel

No shit. I sent an email two months ago and just last week they replied with a cost of $140 . No picture attached. Then I asked for a picture and approx eta. And have not received anything back yet.

Just make it yourself

transcribed by carrier pigeon for Tapatalk

[Long Travel Ind.]

hey Mike what email are you sending too???? for anyone that has sent an email to us the reply has been the same we will have them avail after the first of the year, as far as pictures we have built a few custom one off's but here is what the production pieces will be is a frame and a couple different face plates a blank one and a few radio intercom /switch/gauge combos......