Rugged Radio & Intercom Instal *HOW TO*

[RuggedRadios]

HOW TO HOOK UP YOUR INTERCOM and RADIO using the Vertex Standard VX2200 50watt Radio and Rugged RRP660 Race/Play Intercom

1) Make sure you have your radio, intercom, and radio jumper out and ready



2) Next take the grey serial plug from the CJ-VX4200 and connect it to the radio via the set screws.


3) Plug the male 3.5mm jack into the female outlet, it may look like your looping it back to the radio which is normal



4) Plug the 5 pin Male into the 5pin Female. Just as a reminder we added the Green bands to assist you during your install


5) Plug the molex connector from the radio into the power lead you hooked up to your power source


6) Plug the molex connector from the Intercom into the power lead you hooked up to your power source


7) Plug your headset cables in the appropriate positions


7.1) This is what all the plugs should look like when installing a two person intercom system using the push to talk buttons on the headsets


8) Turn your radio on and make sure the orange light turns on on the radio as well as the blue light on the intercom. Test communications to ensure everything is hooked up correctly.

[JoeyD23]

Awesome Info!!!

[Goodtimes]

Very nice indeed, I need to get this up on my wall by my soon to be display!

[RuggedRadios]

Craziness in the RUGGED world. Lots of new things happening.

[DUNE DUMMY 29]

Originally Posted by JoeyD23

Awesome Info!!!

THANKS FOR THE INFO. I STILL HAVE NOT INSTALLED MINE.

[RuggedRadios]

Use this install and type one up and post up pics.

[ParaPros Racing]

HI
this might be lame But..

how and what way would be the best way to set up car to car
i have full intercom and my friends do to so how do we talk on the go??

Thanks
Brad

[RuggedRadios]

PAPABEAR you spot on!!!