Search results

I'll get to see you guys go this time! Do you guys start in the morning or after the cars?

Damn. Second year in a row I'm going to miss it. Either weekend i'm booked. Bachelor Party then the silver state 300. One of these years:o

Everytime I see something Paul has touched I'm amazed. Keep the pics coming and GREAT work.

Sounds like a plan. We will be in either a buckshot or a prerunner chevy both with Chase Motorsports on the side.

How hard are Teryx motors to find? I'm looking at a teryx with a busted up motor. I could rebuild it but might be better off starting new. Aparently the trans blew putting a hole in the case. Any help will do. Thanks guys.

I'll be out there that weekend for the car and truck prerun. Good luch to all. Hope to see some of you guys out there.

The december race is in barstow by slash X. (go to moreracing.net for more info) Go up the 15 take barstow road right (south) about 6 miles ish look for dust and the only bar in the middle of no where. The Chase motorsports crew with have three cars running. I'm starting in 1695 and...

Will do man. I'm throwing a little UG love on the 1 car for this trip. Also if you can make it to the december race you wont regret it. We should have the championship wrapped up and pops is going big with a bbq and party after the race.

I talked to a few guys that are going. Anyone coming from here? Hope to see you guys out there!

Thanks for swinging by Jessi. I was out running a remote pit. Sorry We didnt get a chance to hook up. Next year we are running BITD so we'll be around your neck of the woods alot more. Hope we can meet then.

It was a GREAT weekend this weekend. I started off supporting my Wife and Sister in their first race ever and raising money for the cure. And I finished it off stopping by the offroad expo and checking out the UTVUG booth. The race, as most of you know who were there, was amazing. I've...

If any one racing this event needs help or pit support pull into ANY Chase Motorsports pit. We will have tools, parts, and welders on hand plus a few beers for the guys not racing. -Travis

If any one racing this event needs help or pit support pull into ANY Chase Motorsports pit. We will have tools, parts, and welders on hand plus a few beers for the guys not racing. :) -Travis

You best be saving me a hat this time. I should be there Sunday. Its the same weekend and the PP race in barstow that my wife is racing and NASCAR but I think I'm going to drop the roundy round racing on Sunday to go.

Well if your out there JR swing by buddy. You know we'll have the beers.

I feel ya there. I'm in the shop most of the week trying to get the car prepped for the race. My wife asks why I'm not coming home for dinner. I have to remind her I'm prepping her car. haha.

Is anyone going to the Powder Puff race for the cure race? I know there are alot of UTV's signed up. This is a great race for a great cause. If you are in the Barstow area around october 10th swing but the Chase Motorsports trailer for a beer and to root on my wife and sister. Nothing...

Next race is in december at slash X in barstow. No problem. Glad you could finaly make it out.

True...i'm not argueing i'm just saying that it would get hit alot harder than a TT would in most cases.

True but the Trophies are front runners. Even if this thing starts with the 10's it has the potential to be nerfed. Either way it's a bitchen car! I bet its light and fast.

Thanks guys. Its tough when your going up against dan but what they hay right. If I dont take it this month I hope my mountain bike pics take the cake next month.

Thanks for the help guys. The pick was taken outside Juno.

Hey guys, I need your votes. Over on race-dezert.com there is a forum section called win stuff. If you are a member over there can you go in to the vote for July section and vote for "Alaska Scenery". Thanks for your help! If I dont win this month I'll ask again for next month. haha...

Thanks Joey I know you guys always have my back. Thats why I love this place. As for you FW your going to have to comit one of these times and not just talk about it! hahahaha

Sorry been super busy. Next race is September 12 in Lucerne. We will be racing the 1 car only. Also a little FYI after such a strong finish at this last race I have taken over the points lead with only 2 races to go. WooHoo:D

We can always use help. Our crew is 100% volenteer but there is plenty of food to eat and plenty of beer to drink.

I told you if it still runs after teh race anyone is welcome for a ride! You'll just have to make it out and not miss it. haha.

Thanks guys! It was a ton of work to get three cars together but it paid off in the end.

Had a freakin' blast this race! I started in the 16 car ran 1 lap turned it over to my brother in law (his 1st race) then jumped in the 1 car. I came in for a splash n go on the last lap and my crew told me it's a close race. Sean Dunn was a minute and a half ahead of me! I took off like a...

Happy B-Day man! My 30th was a blast...but then again I was in BAJA. Hope your's will be better!

Happy birthday Rog!

Cant beat that with a stick! It might have to be after our race because we are so busy prepping the cars. Can you PM me your number so I can get all the info incase I can get someone to drop it off. Thanks again!

That may be it. I unplugged the lights and tail lights put another fuse in it and it poped as soon as I turned the light switch. I'll check that. If not I might be making a trip. Thanks for the heads up.

I forgot wich fuse it was. I will investigate it more when I get back in town. Thanks for all your help! Thanks Rick. Yeah I freaking HATE electrical crap. I might throw in the towel so thanks for the heads up.

Thanks again Rog. You Da Man! P.s. I HATE ELECTRICAL!

Thats the thing Rog...I cant seem to find where they are melted. Maybe I'm wrong but I did find other melted wires around the rear area that have already been replace.

Hey Guys, I'm in need of a shop to help me chase down an electrical problem in my moms Rhino. Here's whats going on, the tail lights and headlight do not work as well as the brake switch. I have to start it every time in neutral. I think what happened is the brake wires in the back got to...

It will. Going to try for the July race but deffinatly the September race.

No not really. I could take some pictures of it in the shop but we've already started tear down.

So...not really a particularly great weekend for the Chase Motorsports team. I knew it was going to be a rough race for us the moment we started the car to warm up the motor and drive train. We jacked up the car so the rear wheels could freewheel in turn warming up all the fluids in the...

Next race is in Bastow on july 18th. We'll be running the 1600 there since the 1 car wont be done. am trying to get the 1 car done by time the september race rolls around.

Yeah he is fine. Cars pretty banged up but not too bad. I will race again. My dad is shaken mentaly though. He sitting out a season and letting me race.

Not so hot. Pops started 16th and by time he came around on the first lap was in 8th. At around race mile 90 (19.5 on the second lap) we had a mechanical failure wich locked up the right rear and pops rolled 4-6 times at over 100MPH. As soon as I get the footage edited I'll post it. It sucks...

Thats a bitchen shop Mike! I need one like that at my house.

Yo yo yo...If anyone is going to be out in Lucerne this weekend make sure you come by the Chase Motorsports camp and say whats up. We will be running the #195 FORD powered Porter. Huge line up...over 210 cars pre-entered and over 20 in class 1 alone. We are hoping for a solid top 5...

Come on Rog make with the pics:D

Yeah I have to drive it to work everyother week to get it clean. BLACK SUCKS.

I tried talking the wife into 24's (it's her ride) but in the end I'm glad I got her the 22's. Mainly because of curb checking and ride quality. I just wish they filled the wheel wells better. I might throw a small drop on it. Blacked out everything. It used to have the gold bottom...

have fun and be safe...and bring home the "W"

It's nothing special. It's in an industrial area. Looks like a bunch of roll up doors in a row with other businesses in the others suites.