If the tubes are hooked up they are good. If the cam sensor is bad it wont run. Accel pedal could be it but a good scanner can easily check this unless it is intermittent. Is it down on power all the time or just that one time?
Now is down on power - we are going to clean all the tubes and install new rubberIf the tubes are hooked up they are good. If the cam sensor is bad it wont run. Accel pedal could be it but a good scanner can easily check this unless it is intermittent. Is it down on power all the time or just that one time?
This usually causes a misfire type condition which doesn't seem to be the issue he is havingUndervalve cover harness
Sent from my SM-N930T using Tapatalk
Thank Looks like two more part I can replace ;-)Maybe this will help..........
http://dieseliq.com/9-common-problems-with-73-power-stroke-diesel-engines
Or maybe the fuel filter in the tank.
Cisco, I hope you get it figured out.
Yeah some for sure but they are gutless . Im obviously guessing but them harnesses are a common problem.This usually causes a misfire type condition which doesn't seem to be the issue he is having
The check engine light come on for these, and I've never had bogging issues and Ive had these replaced twice.Yeah some for sure but they are gutless . Im obviously guessing but them harnesses are a common problem.
The part that includes a new truck!!!well if all the parts we are installing does not fix it that will be my next part ;-)
The part that includes a new truck!!!
I have already made reservations, Thursday - Tuesday, site 97A/B. Its a double camp. Jody myself and our wives will be there.You is funny today ;-)
Hey you need to sign up for our John Berry Ride
http://utvunderground.com/forum/ind...-february-17-20-2017.20190/page-3#post-198523
Awesome ;-)I have already made reservations, Thursday - Tuesday, site 97A/B. Its a double camp. Jody myself and our wives will be there.
Still working on it - I ordered the inter-cooler boot kit for it, but after we took it apart we found out it has a Banks system on it and had to order the boots and clamps from Banks + we found some vacuum lines that are bad had to order them from Ford and the intake boots and clamps from Ford ;-(Is it fixed yet
Sent from my SM-G935T using Tapatalk