2001 F250 7 3 diesel bogs down

tatum

Hans Solo - 2009 UTV Baja 500 & 1000 Winner - UTVU
Feb 10, 2009
1,450
198
63
arizona
If the tubes are hooked up they are good. If the cam sensor is bad it wont run. Accel pedal could be it but a good scanner can easily check this unless it is intermittent. Is it down on power all the time or just that one time?
 

Cisco Kid

Puro Corazon - UTVUnderground La Famila
Apr 17, 2009
7,862
81
48
If the tubes are hooked up they are good. If the cam sensor is bad it wont run. Accel pedal could be it but a good scanner can easily check this unless it is intermittent. Is it down on power all the time or just that one time?
Now is down on power - we are going to clean all the tubes and install new rubber
and going to install new CPS + the new Pedal with both new sensors ;-)
 
  • Like
Reactions: tatum

warlock

Wanna Go Fast? - UTVUnderground Approved
Jan 23, 2009
1,041
170
63
54
az
Undervalve cover harness

Sent from my SM-N930T using Tapatalk
 

warlock

Wanna Go Fast? - UTVUnderground Approved
Jan 23, 2009
1,041
170
63
54
az
This usually causes a misfire type condition which doesn't seem to be the issue he is having
Yeah some for sure but they are gutless . Im obviously guessing but them harnesses are a common problem.
 

tatum

Hans Solo - 2009 UTV Baja 500 & 1000 Winner - UTVU
Feb 10, 2009
1,450
198
63
arizona
I had it once when my truck was under warranty and they had an upgraded gasket. No issues since then.
 

Cisco Kid

Puro Corazon - UTVUnderground La Famila
Apr 17, 2009
7,862
81
48
well if all the parts we are installing does not fix it that will be my next part ;-)
 

warlock

Wanna Go Fast? - UTVUnderground Approved
Jan 23, 2009
1,041
170
63
54
az
They can test the under valve cover Harness. sometimes they wiggle loose and make contact again and sometimes they will leave you stranded.
 

Cisco Kid

Puro Corazon - UTVUnderground La Famila
Apr 17, 2009
7,862
81
48
Is it fixed yet

Sent from my SM-G935T using Tapatalk
Still working on it - I ordered the inter-cooler boot kit for it, but after we took it apart we found out it has a Banks system on it and had to order the boots and clamps from Banks + we found some vacuum lines that are bad had to order them from Ford and the intake boots and clamps from Ford ;-(

Thank You for asking ;-)
 

Members online

Forum statistics

Threads
17,292
Messages
179,387
Members
12,145
Latest member
felipebenjamin000