All UTV's T4 on a budget?
- Thread starter deviant_illusion
- Start date
had a chance to work on it for a little bit tonight. started by cutting another massively bent piece of frame out.
Then fitted a new crossmember behind the engine
Then turned it into a little box.
Hopefully more to come this week.
Sent from my ADR6350 using Tapatalk
Then fitted a new crossmember behind the engine
Then turned it into a little box.
Hopefully more to come this week.
Sent from my ADR6350 using Tapatalk
My garage looks like a war zone and I still have some bracing and welding but she is back on her own feet. Now I can measure for my driveline and send it out.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Dude nice work. I love that you come up with an idea and just execute it. Hope everything comes out great!
On step forward and 20 steps back.
Raising the roof
And a little getting a fill for some new lines.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Raising the roof
And a little getting a fill for some new lines.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Was able to get a little bit done before Saturday honey do list.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
This thing is finally just about ready for aluminum work. If anyone is interested in the progress you can check it out here. http://utahoffroadadventure.com/forum/viewtopic.php?f=5&t=553
Last edited:
Thanks, Took a good break from it for awhile and have been riding dirt bike tons but now its to hot to ride bikes so it time to finish it.
So this thing has been running for awhile but I wanted to get some miles on her before I did a body just to make sure the chassis had no problems. She handles awesome. 65 mph now feels like 45 mph
Anyways started on the body yesterday at about 1 pm and worked till about 2 am. Still have a lot to do but it it's taking shape. I build and soldered a harness and wired Doug's rhino intercom while he worked on my aluminum. Then we both did the roof together.
Two small side panels per side and the roof and we managed to burn through 50 of the fancy over priced dzus fasteners so looks like I need to order about 24 more. The rear floor is bolted in with 3/8 ss button heads and other then the doors the rest of the panels will uses ss button heads.
Nearly $70 in dzus fasteners on just the roof alone.
Anyways started on the body yesterday at about 1 pm and worked till about 2 am. Still have a lot to do but it it's taking shape. I build and soldered a harness and wired Doug's rhino intercom while he worked on my aluminum. Then we both did the roof together.
Two small side panels per side and the roof and we managed to burn through 50 of the fancy over priced dzus fasteners so looks like I need to order about 24 more. The rear floor is bolted in with 3/8 ss button heads and other then the doors the rest of the panels will uses ss button heads.
Nearly $70 in dzus fasteners on just the roof alone.
Mostly need to trim more of the fender to get it to sit correctly. The autofab body mounts are great and do allow some play. It was late and small alignment stuff will be taken care or on final assembly.